Posted on Leave a comment

Transferring Images to Canvas with Super Sauce

Super Sauce Transfer to Canvas Banner
Pocket

Be the first to find out about new deals & tutorials by signing up for our newsletter!

Making handmade gifts for your loved ones can be a fun and rewarding process. Receiving a unique and personalized item can feel amazing and really add to a gift recipient’s holiday cheer. This tutorial is part of a DIY holiday gift idea series where we teach you different methods of using Inkjet Prints on DASS Transfer Film. Today, we will show how to perform the super sauce transfer to canvas, which is best if you are at an intermediate level in image transferring. If you are a beginner, don’t feel discouraged. This tutorial has everything you need but it may require some practice tries before you can get it just right! If you are looking for something easier, we recommend trying the alcohol transfer. 

Preparing the Images for Transfer: Images must be printed to DASS Transfer Film using an Inkjet Printer. Through our company, Kirkpatrick & Co. Specialty Printing, we can print your images to this film for you. Order your print today.

If you have your own inkjet printer, make sure that you flip your image horizontally before printing. If you don’t, your image will be flipped the wrong way when you transfer it. Also be sure that the ink is printing on the rough/textured side of the DASS Transfer Film. 

Super Sauce Transfer to Canvas (Intermediate Skill Level)

Materials Needed:

mason jar
super sauce (super sauce concentrate & 91% isopropyl alcohol)
brush
Inkjet print on DASS Transfer Film
canvas panel or stretched canvas

Super Sauce Transfer to Canvas

To make super sauce, mix the following two ingredients in a mason jar. Let the jar sit for at least 6 hours, periodically shaking the jar vigorously during that time. Please note that you should never add any water to this mixture or your brushes. It can cause severe damage to plumbing and will render your brushes unusable. 

1 TBS Matte Super Sauce Concentrate
4 oz 91% isopropyl alcohol (must be 91%)

Transfer Directions

Apply the super sauce mixture to your canvas surface. Here we are applying an image to an acrylic painted canvas surface. Using a brush, apply the super sauce mix evenly to the surface. If there is too much, the image will run and if there is too little, the image won’t transfer. I suggest doing some practice transfers so that you get a feel for how the transfer works. 

Applying Super Sauce to the Canvas Surface

Once you have applied enough super sauce, you can line your transfer film up above the surface, print side down. Once you are happy with the alignment, you can place it down onto the canvas surface.

Lightly press the film down to ensure that the image is making full contact with the super sauce. After 2-3 minutes, slowly begin to pull the film up by one corner. You will be able to tell if the image is sticking. If not, press it back down and give it a little more time. Once it is ready, the film will be able to be pulled away, leaving the image transferred to the surface below. 

Removing the Transfer film by peeling it back

At this point, let your transfer dry for 24 hours before spraying it with a protective finish. We recommend using Krylon Crystal Clear spray.

Completed Transfer

Be on the lookout for future tutorials in our holiday gift idea series. Consider signing up to get notified when it is out! You can also see all of the posts from this series here.

Did you enjoy this tutorial? Be the first to find out about new deals & tutorials by signing up for our newsletter! We are here to answer any questions you have along the way. Follow us on Instagram to see what others in our community are making and join in on the conversation!

Posted on Leave a comment

Decorating Envelopes: Alcohol Transfer

Alcohol Transfer or an Envelope Banner
Pocket

Making handmade gifts for your loved ones can be a fun and rewarding process. Receiving a unique and personalized item can feel amazing and really add to a gift recipient’s holiday cheer. This tutorial is part of a DIY holiday gift idea series where we teach you different methods of using Inkjet Prints on DASS Transfer Film. Today, we will show you how to perform the alcohol transfer on an envelope.  If you haven’t tried the alcohol transfer before, it might be easier to follow along with our previous tutorial first.

Preparing the Images for Transfer: Images must be printed to DASS Transfer Film using an Inkjet Printer. Through our company, Kirkpatrick & Co. Specialty Printing, we can print your images to this film for you. Order your print today.

If you have your own inkjet printer, make sure that you flip your image horizontally before printing. If you don’t, your image will be flipped the wrong way when you transfer it. Also be sure that the ink is printed on the rough/textured side of the DASS Transfer Film. 

Alcohol Transfer to an envelope (Beginner Skill Level)

Materials Needed:

materials needed for alcohol transfer to an envelope

Purell Advanced Hand Sanitizer
Inkjet print on DASS Transfer Film
envelope

Transfer Directions

1.Since this application does not require a brush, you can just apply the Purell with your finger. You will need to apply the hand sanitizer evenly to the surface of the envelope where you want the transfer to go. If there is too much, the image will run and if there is too little, the image won’t transfer. Also note that with most envelopes, this transfer method will leave a water stain behind. It really depends on the envelope, so you might want to practice on different thicknesses of papers until you are happy with the result.  

Quickly position your print face down above your paper surface and once you have it lined up, lay it straight down onto the surface. Avoid rubbing the print as it can blur your image. Just make sure it has made full contact with the paper surface. 
 

Placing the DASS Transfer Film down onto the surface.

After letting it set for about 30 seconds, slowly begin to peel the film back at one corner. If the image has transferred to the envelope, keep removing the film. If it is still stuck to the film, press it back down. Then try again until it is ready. If it refuses to transfer, that may mean you did not apply enough Purell hand sanitizer to the surface. If this happens and your print is not damaged or unusable, apply more Purell and try again. If not, you will need to get a new print and start over. 

Removing the Transfer Film from the envelope

At this point, let your transfer dry for at least 2 hours before spraying it with a protective finish. Leaving the extra time will make sure that your image has set into the envelope and that the ink has fully dried. At first, the envelope will look dark because it is wet. Once it dries, there will most likely be a water stain left. You can come up with a creative way to make it look purposeful. You can see what we did for our envelope below.
 

Once you are happy with the result of the transfer, we recommend using Krylon Crystal Clear spray to seal it.

This is the end of the fourth tutorial in our holiday gift idea series. Be on the lookout for our next tutorial. Consider signing up to get notified when it is out! You can also see all of the posts from this series here.

Did you enjoy this tutorial? Be the first to find out about new deals & tutorials by signing up for our newsletter! We are here to answer any questions you have along the way. Follow us on Instagram to see what others in our community are making and join in on the conversation!

Posted on 1 Comment

Super Sauce Transfer to Tile

Super Sauce Transfer to Tile Banner
Pocket

Be the first to find out about new deals & tutorials by signing up for our newsletter!

Making handmade gifts for your loved ones can be a fun and rewarding process. Receiving a unique and personalized item can feel amazing and really add to a gift recipient’s holiday cheer. This tutorial is part of a DIY holiday gift idea series where we teach you different methods of using Inkjet Prints on DASS Transfer Film. Today, we will show you how to perform the super sauce transfer to a tile surface.

Preparing the Images for Transfer: Images must be printed to DASS Transfer Film using an Inkjet Printer. Through our company, Kirkpatrick & Co. Specialty Printing, we can print your images to this film for you. Order your print today.

If you have your own inkjet printer, make sure that you flip your image horizontally before printing. If you don’t, your image will be flipped the wrong way when you transfer it. Also be sure that the ink is printed on the rough/textured side of the DASS Transfer Film. 

For this, we will use 4 x 4 inch tiles that can be found at any hardware store.

Super Sauce Transfer to Tile (Intermediate Skill Level)

Materials Needed:

Materials Needed for the Super Sauce Transfer to Tile

4 x 4 inch tile
paint brush for applying the primer
foam brush to apply the super sauce
primer (1:1 ratio of super sauce gloss concentrate (WITHOUT ISOPROPYL ALCOHOL) & water)
mason jar
super sauce (Supersauce Gloss Concentrate & 91% Isopropyl alcohol)
inkjet print on DASS Transfer Film

Transfer Directions

Using a brush, apply the 1:1 ratio of super sauce concentrate & water evenly to the surface of the tile. After it dries, it will act as a primer that the image can transfer to. Without preparing the tile, it will be too smooth and your image will not stick.

Once the primer has dried, your surface is ready for the image transfer. Dip the foam brush in the super sauce once and apply it to the surface. We recommend applying it left to right from top to bottom and then top to bottom from left to right. This will help you get the proper consistency of super sauce on your surface. You should not need to dip your brush more than once for this transfer. If you do, it is possible you will apply too much and your image will run.

After applying the super sauce, you will want to wait about 30 seconds to place your image print side down onto the super sauce coated surface. After waiting 30 seconds, line the image up print side down above the tile. Carefully lower it down until it makes contact with the super sauce. After a few seconds, gently press along the top of the transfer film to be sure that the film has made full contact with the surface.

Let the film set for about 3 minutes while gently pressing down on the film to ensure full contact and to push out any air bubbles that may occur. Don’t press or rub the film too much as it could blur your image. After 3 minutes, your image should be ready enough to begin peeling the transfer film away. Start with one corner and pull it up slowly. If the image is sticking to the surface, that is a very good sign! Keep slowly peeling the film away until it releases from the surface. If the image hasn’t stuck to the surface yet, lay it back down for a little longer and press down slightly to help it transfer. This process often requires a give and take when removing the film.

Once the film has been removed, let the transfer dry for 24 hours before you put any protective coating on it. This will allow the proper amount of time for your ink to set.

After it has dried, we recommend spraying your transfer with Krylon Crystal Clear.

This is the end of the third tutorial in our holiday gift idea series. Our next tutorial will teach you how to decorate envelopes with alcohol transfers. Consider signing up to get notified when it is out! You can also see all of the posts from this series here.

Did you enjoy this tutorial? Be the first to find out about new deals & tutorials by signing up for our newsletter!

Posted on 1 Comment

Holiday Gift Ideas Using DASS Transfer Film: Alcohol Transfer to Wood

Alcohol Transfer to Wood Banner
Pocket

Be the first to find out about new deals & tutorials by signing up for our newsletter!

Making handmade gifts for your loved ones can be a fun and rewarding process. Receiving a unique and personalized item can feel amazing and really add to a gift recipient’s holiday cheer. This tutorial is part of a DIY holiday gift idea series where we teach you different methods of using Inkjet Prints on DASS Transfer Film. Today, we will show how to perform the alcohol transfer, which is great if you are a beginner.  Once you complete this transfer method and decide you are looking for a challenge, we recommend trying the super sauce transfer.

Preparing the Images for Transfer: Images must be printed to DASS Transfer Film using an Inkjet Printer. Through our company, Kirkpatrick & Co. Specialty Printing, we can print your images to this film for you. Order your print today.

If you have your own inkjet printer, make sure that you flip your image horizontally before printing. If you don’t, your image will be flipped the wrong way when you transfer it. Also be sure that the ink is printed on the rough/textured side of the DASS Transfer Film. 

Think about how you want your images to be presented. Will it be a wood ornament? They have wood slices pre-drilled with holes on Amazon which would be perfect for this! You could even make a wood block that hangs on the wall. 

Alcohol Transfer to Wood (Beginner Skill Level)

Materials Needed:

 Alcohol Transfer to Wood
Purell Advanced Hand Sanitizer
Rubber Glove
Inkjet print on DASS Transfer Film

Transfer Directions

  1. Since this application does not require a brush, we suggest that you wear a rubber glove to avoid getting splinters. Using a gloved finger, apply the hand sanitizer evenly to the surface of the wood. If there is too much, the image will run and if there is too little, the image won’t transfer.
         
  2. Quickly position your print face down above your wood surface and once you have it lined up, lay it straight down onto the surface. Avoid rubbing the print as it can blur your image. Just make sure it has made full contact with the wood surface. 
    DASS Transfer Film laying print side down onto the Purell covered wood surface. Gloved finger gently applying pressure to make sure that the print has made full contact with the wood surface
  3. After letting it set for about 30 seconds, slowly begin to peel the film back at one corner. If the image has transferred to the wood, keep removing the film. If it is still stuck to the film, press it back down. Then try again until it is ready. If it refuses to transfer, that may mean you did not apply enough Purell hand sanitizer to the surface. If this happens and your print is not damaged or unusable, apply more Purell and try again. If not, you will need to get a new print and start over. 
    Hand slowly peeling the DASS Transfer Film up from the wood surface. Hand slowly peeling the DASS Transfer Film up from the wood surface.
  4. At this point, let your transfer dry for at least 6 hours before spraying it with a protective finish. Leaving the extra time will make sure that your image has set into the wood. At first, the wood will look dark because it is wet. Once it dries, the color will go back to normal. 
    Image transfer immediately after the DASS Transfer Film has been removed. The wood is still wet and looks darker. The image after it has successfully been transferred. It is still wet and needs to dry.
  5. Once the wood has dried you will want to put a protective finish on it. We recommend using Krylon Crystal Clear spray.
    The image transfer after the wood has dried.

This is the end of the first tutorial in our holiday gift idea series. Our next tutorial will teach you how to complete the super sauce transfer. Consider signing up to get notified when it is out! You can also see all of the posts from this series here.

Did you enjoy this tutorial? Be the first to find out about new deals & tutorials by signing up for our newsletter!

Posted on 1 Comment

Holiday Gift Ideas Using DASS Transfer Film: Super Sauce Transfer to Wood

Pocket

Be the first to find out about new deals & tutorials by signing up for our newsletter!

Making handmade gifts for your loved ones can be a fun and rewarding process. Receiving a unique and personalized item can feel amazing and really add to a gift recipient’s holiday cheer. This tutorial is part of a DIY holiday gift idea series where we teach you different methods of using Inkjet Prints on DASS Transfer Film. Today, we will show how to perform the super sauce transfer, which is best if you are at an intermediate level in image transferring. If you are a beginner, don’t feel discouraged. This tutorial has everything you need but it may require some practice tries before you can get it just right! If you are looking for something easier, we recommend trying the alcohol transfer.

Preparing the Images for Transfer: Images must be printed to DASS Transfer Film using an Inkjet Printer. Through our company, Kirkpatrick & Co. Specialty Printing, we can print your images to this film for you. Order your print today.

If you have your own inkjet printer, make sure that you flip your image horizontally before printing. If you don’t, your image will be flipped the wrong way when you transfer it. Also be sure that the ink is printing on the rough/textured side of the DASS Transfer Film. 

Think about how you want your images to be presented. Will it be a wood ornament? They have wood slices pre-drilled with holes on Amazon which would be perfect for this! You could even make a wood block that hangs on the wall. 

Super Sauce Transfer to Wood (Intermediate Skill Level)

Materials Needed:

mason jar
super sauce (super sauce concentrate & 91% isopropyl alcohol)
foam brush
Inkjet print on DASS Transfer Film

image of the ingredients listed above.

To make super sauce, mix the following two ingredients in a mason jar. Let the jar sit for at least 6 hours, periodically shaking the jar vigorously during that time. Please note that you should never add any water to this mixture or your brushes. It can cause severe damage to plumbing and will render your brushes unusable. 

1 TBS Matte Super Sauce Concentrate
4 oz 91% isopropyl alcohol (must be 91%)

Transfer Directions

Apply the super sauce mixture to your wood surface. Using a brush, apply the super sauce mix evenly to the surface. If there is too much, the image will run and if there is too little, the image won’t transfer. I suggest doing some practice transfers so that you get a feel for how the transfer works. 

Once you have applied enough super sauce, you can line your transfer film up above the surface, print side down. Once you are happy with the alignment, you can place it down onto the surface.

Lightly press the film down to ensure that the image is making full contact with the super sauce. After 2-3 minutes, slowly begin to pull the film up by one corner. You will be able to tell if the image is sticking. If not, press it back down and give it a little more time. Once it is ready, the film will be able to be pulled away, leaving the image transferred to the surface below. 

At this point, let your transfer dry for 24 hours before spraying it with a protective finish. We recommend using Krylon Crystal Clear spray.

This is the end of the second tutorial in our holiday gift idea series. Our next tutorial will teach you how to complete the super sauce transfer on a 4 x 4 inch tile. Consider signing up to get notified when it is out! You can also see all of the posts from this series here.

Did you enjoy this tutorial? Be the first to find out about new deals & tutorials by signing up for our newsletter!